General Procedures | -
Remove fuse F58 from the central junction box (CJB). | | -
Wait for 15 seconds and install the fuse to the CJB. | | -
Switch the DVD player ON. | | -
The DVD player will display: Keycode entry requested. | | -
PRESS and HOLD the AUX button for 5 seconds until the DVD player serial number is shown in the display. - Make a note of the DVD player serial number.
| | -
Switch the DVD player OFF. | | -
Obtain the keycode from GSEVIN. | | -
Switch the DVD player ON. | | -
Enter the DVD player keycode. For additional information, refer to the Operating Guide. | | |