Remove the headlamp assembly. For additional information, refer to: Scheinwerfereinheit (417-01, Removal and Installation).
Remove the rear headlamp cover.
Disconnect the headlamp leveling motor electrical connector.
NOTE:The headlamp leveling motor must be turned clockwise when removing from the left-hand headlamp and counter-clockwise when removing from the right-hand headlamp.
Turn the headlamp leveling motor to the stop.
Remove the headlamp leveling motor.
Pull out the headlamp leveling motor ball head from the guide.
Remove the headlamp leveling motor.
Installation
CAUTION:Ensure that the internal headlamp wiring harness is not trapped when installing the headlamp rear cover.
CAUTION:Ensure that the ball head of the headlamp leveling motor is pushed correctly into the guide.