ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Anti-Theft Security Access > < Anti-Theft - Passive

Focus 2004.75 (07.2004-)

Anti-Theft - Passive - Key Programming Using Diagnostic Equipment Focus 2004.75 (07/2004-)
General Procedures

General Equipment
Worldwide Diagnostic System (WDS) (418-F224)
NOTE:
NOTE:This procedure is used when a customer needs keys programmed into the system or after keys have been erased using diagnostic equipment.
NOTE:
NOTE:During this procedure it will be necessary to utilize the Anti-Theft System (PATS) Security Access Procedure. PATS security access must be granted to erase or program ignition keys. The anti-theft security access procedure requires access to the GSEVIN database in order to obtain the coded security access.
NOTE:
NOTE:This procedure will not erase programmed ignition keys from the passive anti-theft alarm system (PATS) memory.
NOTE:
NOTE:A maximum of eight ignition keys can be programmed to a passive anti-theft system (PATS) equipped vehicle.
  1. Insert an ignition key into the ignition lock cylinder and turn the ignition key from the 0 position to the II position.
  1. From the diagnostic tool menu Select: Body/Security/PATS Functions. Follow the instructions on the screen.
  1. From the diagnostic tool menu Select: Ignition Key Programming. Follow the instructions on the screen.

Anti-Theft Security Access > < Anti-Theft - Passive