Removal and Installation CAUTION:The bolt securing the safety belt anchor is held captive by a metal washer. The bolt, spacer and metal washer must remain on the safety belt anchor at all times when the safety belt is detached or removed. | -
Detach the safety belt lower anchor. - Remove the front safety belt lower anchor retaining bolt.
- Slide the safety belt off the anchor rail.
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3 - Rear quarter glass trim panel retaining screws 5 - B-pillar trim panel retaining screw cover 6 - B-pillar trim panel retaining screws 3. To install, reverse the removal procedure. Removal Details Item 1 : Front door opening weatherstrip | -
Detach the front door opening weatherstrip. | Item 2 : Rear quarter glass trim panel retaining screw trim cover | -
Using a suitable flat blade screwdriver, lever out the rear quarter glass trim panel retaining screw trim cover. | Item 4 : Rear quarter glass trim panel | -
Detach the rear quarter glass trim panel. | Item 7 : B-pillar trim panel | -
Detach the B-pillar trim panel. - Feed the safety belt webbing through the B-pillar upper trim panel.
| Installation Details Item 7 : B-pillar trim panel | -
Feed the safety belt webbing through the B-pillar upper trim panel before installation. | | -
NOTE:Make sure the B-pillar seatbelt height adjustment lever is in alignment with the seatbelt height adjustment mechanism. Install the B-pillar trim panel. | |