Removal and Installation | -
Disconnect the battery ground cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Front door pull handle cover 4 - Front door pull handle retaining bolts 6 - Front door power window control unit bezel (front door trim panel pull handle shown removed for clarity) 3. To install, reverse the removal procedure. | -
Initialize the door window motors. For additional information, refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | Removal Details Item 1 : Front door latch remote control handle bezel | -
Remove the front door latch remote control bezel. - Disconnect the remote keyless entry door lock button (if equipped).
| Item 3 : Front power window control unit electrical connector | -
Disconnect the front door power window control unit electrical connector. | Item 5 : Front door trim panel | -
Remove the front door trim panel. | Item 7 : Front door trim panel retaining clips | -
Remove the front door trim panel retaining clips. - Release the front door trim panel retaining clip locking tang.
- Remove the front door trim panel retaining clip.
| Installation Details Item 7 : Front door trim panel retaining clips | -
Install the front door trim panel retaining clips to the front door trim panel. | |