Removal and Installation Removal | -
Remove the high mounted stoplamp. - Remove the retaining screws.
- Disconnect the electrical connector.
| | -
Remove the liftgate lower trim panel. | | -
Remove the liftgate upper trim panel. | | -
Detach the rear spoiler from the liftgate. - Remove the retaining clips.
- Remove the retaining screws.
| | -
Detach the liftgate glass washer nozzle hose from the rear spoiler. - Disconnect the liftgate glass washer nozzle hose from the washer nozzle.
| | -
Remove the rear spoiler. - Feed the high mounted stoplamp wiring harness through the rear spoiler.
| Installation | -
To Install, reverse the removal procedure. | | |