Removal and Installation | -
Remove the rear door trim panel. For additional information, refer to: Rear Door Trim Panel - Vehicles With: Manual Windows (501-05 Interior Trim and Ornamentation, Removal and Installation). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 3. To install, reverse the removal procedure. Removal Details Item 2 : Interior weatherstrip CAUTION:Carefully remove the interior weatherstrip to avoid damage. Item 3 : Window glass | -
Install the window regulator handle. | | -
Fully lower the window glass. | | -
Position the lower part of the door glass top run outside the door. | | -
Loosen the rear door window glass clamp retaining bolts two complete turns. - Align the window glass clamp retaining bolts with the access holes.
| | -
NOTE:The rear door window glass must be removed towards the outside of the window opening. Remove the rear door window glass. - Lift the window glass.
- Tip the window glass outwards and remove the window glass from the rear door.
| Installation Details Item 3 : Window glass NOTE:The rear door window glass must be installed from the outside of the window opening. |