Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). 2. To install, reverse the removal procedure. Removal Details Item 1 : Interior lamp | -
Using a suitable screwdriver, detach the interior lamp from the overhead console. | | -
Disconnect the electrical connectors and remove the interior lamp. | Item 2 : Overhead console | -
Detach the overhead console from the overhead console reinforcement. | | -
Disconnect the power roof opening panel control switch electrical connector. | | -
Disconnect the microphone electrical connector (if equipped). | Item 3 : Microphone (if equipped) | -
Detach the microphone wiring harness from the overhead console. | | -
NOTE:Note the position of the microphone to aid installation. Remove the microphone. - Release the locking tangs.
| Installation Details Item 2 : Overhead console NOTE:Make sure the overhead console retaining clips are fully engaged to the overhead console opening reinforcement. |