| Disassembly and Assembly | | -
Remove the ignition lock cylinder.
For additional information, refer to: Ignition Lock Cylinder (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).
| 2. Disassemble the components in the order indicated in the following illustration(s) and table(s). 4 - Ignition lock cylinder barrel cover 8 - Ignition lock cylinder barrel tumbler springs 9 - Ignition lock cylinder barrel 3. To assemble, reverse the disassembly procedure. | | -
Install the ignition lock cylinder.
For additional information, refer to: Ignition Lock Cylinder (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).
| Disassembly Details Item 1 : Ignition lock cylinder locking button | | -
Remove the ignition lock cylinder locking button. - Using a suitable tool, release the ignition lock cylinder locking button leaf spring and remove the ignition lock cylinder locking button leaf spring.
- Detach the ignition lock cylinder locking button from the ignition lock cylinder housing and remove the ignition lock cylinder locking button.
| Item 2 : Ignition lock cylinder housing | | -
Remove the ignition lock cylinder housing. - Operate the ignition lock cylinder retaining clip.
- Slide the ignition lock cylinder housing away from the ignition lock cylinder barrel guide.
| Item 5 : Ignition lock cylinder retaining clip Item 7 : Ignition lock cylinder barrel tumblers | | -
NOTE:Make sure to read the key code from the key entry to the end of the lock barrel in sequence. NOTE:Make a note of the position and orientation of the ignition lock cylinder barrel tumblers. Remove the ignition lock cylinder barrel tumblers and springs in the correct order. | Assembly Details Item 7 : Ignition lock cylinder barrel tumblers | | -
NOTE:Make sure to read the key code from the key entry to the end of the lock barrel in sequence. NOTE:One group of tumblers is signed with a one digit number (1 to 5), the other group of tumblers is signed with a two digit number (11 to 15). Assemble the ignition lock cylinder barrel tumblers and springs in the correct order. | Item 6 : Ignition lock cylinder barrel guide | | -
NOTE:Make sure that the ignition lock cylinder barrel guide indents align with the ignition lock cylinder barrel guide. Install the key and the assembled lock cylinder barrel into the ignition lock cylinder barrel guide and remove the key. | Item 5 : Ignition lock cylinder retaining clip | | -
Install the ignition lock cylinder retaining clip. | Item 3 : Ignition lock cylinder retaining clip | | -
Install the ignition lock cylinder retaining clip in the position shown. | Item 2 : Ignition lock cylinder housing | | -
Install the ignition lock cylinder housing. - Operate the ignition lock cylinder retaining spring and locking button.
- Slide the ignition lock cylinder housing onto from the ignition lock cylinder barrel guide.
| Item 1 : Ignition lock cylinder locking button | | -
Assemble the ignition lock cylinder locking button and leaf spring and install in the position shown. | | 
