Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Exterior front door handle retaining screw grommet 3 - Exterior front door handle bezel 5 - Exterior front door handle gasket 8 - Exterior front door handle seal 2. To install, reverse the removal procedure. Removal Details Item 2 : Exterior front door handle retaining screw | -
Loosen the exterior front door handle retaining screw until the exterior front door handle bezel can be removed. | Item 4 : Exterior front door handle | -
NOTE:Do not place excessive strain on exterior front door handle antenna wiring harness. Detach the exterior front door handle. - Slide the exterior front door handle rearwards to disengage it from the exterior front door handle bracket.
- Detach the exterior front door handle.
| Item 6 : Exterior front door handle antenna wiring harness NOTE:Do not place excessive strain on the exterior front door handle antenna wiring harness. | -
Pull the exterior front door handle antenna wiring harness until an audible click is heard and the exterior front door handle antenna wiring harness electrical connector is in the horizontal position. | Item 7 : Exterior front door handle antenna electrical connector | -
Disconnect the exterior front door handle antenna electrical connector from the exterior front door handle antenna electrical connector and holder. | Installation Details Item 6 : Exterior front door handle antenna wiring harness | -
Lift and push the exterior front door handle antenna wiring harness electrical into the exterior front door handle antenna electrical connector and holder. | Item 2 : Exterior front door handle retaining screw | -
Tighten the exterior front door handle retaining screw. | |