| Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Liftgate trim panel retaining screws 3 - Exterior liftgate release switch electrical connectors 5 - Licence plate illumination electrical connectors 2. To install, reverse the removal procedure. Removal Details Item 4 : Licence plate illumination panel retaining nuts | | -
CAUTION:Make sure that excessive strain is not placed on the licence plate illumination panel electrical connectors and wiring harnesses. Detach the licence plate illumination panel from the liftgate. | | | -
Detach the exterior liftgate release switch wiring harness grommet from the liftgate. | Item 6 : Exterior liftgate release switch | | -
Press the clips and remove the exterior liftgate release handle from the licence plate illumination panel. | Installation Details Item 2 : Liftgate trim panel | | -
Install the liftgate trim panel retaining clips to the liftgate trim panel before installation to the liftgate. | | 
