| Removal and Installation | | -
Using a suitable flat blade screwdriver, remove the luggage compartment lid trim panel handle from the luggage compartment lid trim panel. | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Luggage compartment lid trim panel retaining clips 2 - Luggage compartment lid trim panel 3 - Exterior luggage compartment lid release switch electrical connectors 5 - Licence plate illumination panel electrical connectors 3. To install, reverse the removal procedure. Removal Details Item 4 : Licence plate illumination panel retaining nuts | | -
CAUTION:Make sure that excessive strain is not placed on the licence plate illumination panel electrical connectors and wiring harnesses. Detach the licence plate illumination panel from the luggage compartment lid. | | | -
Detach the exterior luggage compartment lid release switch wiring harness grommet from the luggage compartment lid. | Item 6 : Exterior luggage compartment lid release switch | | -
Press the clips and remove the luggage compartment lid release switch from the licence plate illumination panel. | | 
