ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Bumper Cover - Vehicles Built Up To: 12-2007, 4-Door > < Rear Bumper Cover - Vehicles Built Up To: 12-2007, Wagon

Focus 2004.75 (07.2004-)

Bumpers - Rear Bumper Cover—Vehicles Built From: 12/2007, Wagon Focus 2004.75 (07/2004-)
Removal and Installation

Special Tool(s)
501-135
Punching Tool, Parking Aid Sensor

501-150
Punching Tool, Parking Aid Sensor

501-151
Punching Tool, Parking Aid Sensor
General Equipment
12 mm drill bit
18 mm drill bit
5 mm drill bit
Blind rivet gun
Electric drill
Flat file

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1.  
    1. If equipped
    1. On both sides.

Vehicles with parking aid
All vehicles
  1. General Equipment: 5 mm drill bit
    General Equipment: Electric drill

Installation

All vehicles
  1. General Equipment: Blind rivet gun

Vehicles with parking aid
  1. Special Tool(s): 501-150, 501-151

  1. General Equipment: 12 mm drill bit
    General Equipment: 18 mm drill bit

  1. Special Tool(s): 501-135, 501-150, 501-151

  1. General Equipment: Flat file

  1. General Equipment: Flat file
  1. To install, reverse the removal procedure.

Rear Bumper Cover - Vehicles Built Up To: 12-2007, 4-Door > < Rear Bumper Cover - Vehicles Built Up To: 12-2007, Wagon