Removal and Installation | -
Remove the C-pillar trim panel. For additional information, refer to: C-Pillar Trim Panel - 4-Door/5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation). | | -
Remove the D-pillar trim panel. For additional information, refer to: D-Pillar Trim Panel - 4-Door (501-05 Interior Trim and Ornamentation, Removal and Installation). | 3. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Rear safety belt retractor lower anchor retaining bolt 3 - Rear safety belt retractor upper anchor retaining bolt 4. To install, reverse the removal procedure. Removal Details Item 2 : Rear safety belt retractor cover | -
Remove the rear safety belt retractor cover. - Remove the rear safety belt retractor cover retaining clips.
- Detach the rear safety belt retractor cover from the C-pillar.
- Feed the rear safety belt webbing through the rear safety belt retractor cover.
| Installation Details Item 4 : Rear safety belt retractor | -
CAUTION:Make sure that the rear safety belt retractor locating tang is correctly located. Install the rear safety belt retractor. | |