ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Lower Arm - 2.0L Duratec-RS (Zetec) > < Wheel Bearing - 2.0L Duratec-RS (Zetec)

Focus RS 2003 (09.2002-)

Rear Suspension - Front Lower Arm—2.0L Duratec-RS (Zetec) Focus RS 2003 (09/2002-)
Removal and Installation

Removal

  1. Remove the wheel and tire.For additional information, refer to Section  204-04 Wheels and Tires.
  1. Set the suspension to the design height setting. For additional information, refer to Section  204-00 Suspension System - General Information.

  1. CAUTION:
    CAUTION:The front lower arm is marked FRONT. Make a note of the position of the front lower arm to aid installation.
    Remove the front lower arm.

Installation
  1. NOTE:
    NOTE:Check that the suspension is still set at the design height setting.
    Install the front lower arm.
  1. Lower the suspension from the design height setting.

  1. Attach the stabilizer bar to the rear lower arm.
  1. Install the spring.
    For additional information, refer to Spring in this section.
  1. Install the wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

Rear Lower Arm - 2.0L Duratec-RS (Zetec) > < Wheel Bearing - 2.0L Duratec-RS (Zetec)