ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Anti-Lock Brake System (ABS) Module - 2.0L Duratec-RS (Zetec) LHD > < Hydraulic Control Unit (HCU) - 2.0L Duratec-RS (Zetec)

Focus RS 2003 (09.2002-)

Anti-Lock Control - Anti-Lock Brake System (ABS) Module—2.0L Duratec-RS (Zetec) RHD Focus RS 2003 (09/2002-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the charge air cooler. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

  1. Remove the charge air cooler outlet hose.

  1. Disconnect the battery junction box (BJB) electrical connectors.

  1. Remove the BJB retaining screw.

  1. Detach the BJB from the BJB support bracket and position it to one side.
    • Depress the locking tangs.

  1. Disconnect the anti-lock brake system (ABS) module electrical connector.
    1. Release the retainer.
    1. Disconnect the electrical connector.

  1. Remove the ABS module (ABS module and hydraulic control unit (HCU) shown removed for clarity).

Installation

  1. To install, reverse the removal procedure.

Anti-Lock Brake System (ABS) Module - 2.0L Duratec-RS (Zetec) LHD > < Hydraulic Control Unit (HCU) - 2.0L Duratec-RS (Zetec)