Ford Workshop Service and Repair Manuals

Aligner, Clutch Friction Disc

308-204 (16-067)

1. Remove the transaxle. For additional information, refer to Section  308-03C Manual Transmission/Transaxle.

2. 

   CAUTION:Loosen the clutch pressure plate retaining bolts by two turns at a time in the sequence shown.
   Remove the clutch disc and pressure plate.

1. Using the special tool, centralize the clutch disc on the pressure plate.

2. 

   CAUTION:Tighten the clutch pressure plate retainings bolts finger tight and then by two turns at a time in the sequence shown to the specified torque.
   Using the special tool, install the clutch disc and pressure plate.

3. Remove the special tool.

4. Install the transaxle. For additional information, refer to Section  308-03C Manual Transmission/Transaxle.