ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Heater Core and Evaporator Core Housing > < Heating and Ventilation

Focus RS 2003 (09.2002-)

Heating and Ventilation - Blower Motor Focus RS 2003 (09/2002-)
Removal and Installation

Removal
  1. Remove the footwell lower trim panel.
  1. Open the glove compartment.

  1. Remove the footwell vent air duct.
  1. Close the glove compartment.

  1. Disconnect the blower motor electrical connector.

  1. Remove the blower motor.

Installation

  1. To install, reverse the removal procedure.

Heater Core and Evaporator Core Housing > < Heating and Ventilation