ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Air Conditioning > < Condenser Core

Focus RS 2003 (09.2002-)

Air Conditioning - High-Pressure Cutoff Switch Focus RS 2003 (09/2002-)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the high-pressure cutoff switch electrical connector.

  1. NOTE:
    NOTE:Make sure that the high-pressure cutoff switch valve closes completely after removal of the high-pressure cutoff switch to prevent loss of refrigerant.
    Remove the high-pressure cutoff switch.
    • Discard the O-ring seals.

Installation

  1. NOTE:
    NOTE:Install new high-pressure cutoff switch O-ring seals.
    NOTE:
    NOTE:Coat the high-pressure cutoff switch O-ring seals in clean refrigerant oil prior to installation.
    To install, reverse the removal procedure.

Air Conditioning > < Condenser Core