ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
501-09 Rear View Mirrors > < Scuff Plate Trim Panel

Focus RS 2003 (09.2002-)

Interior Trim and Ornamentation - Headliner—2.0L Duratec-RS (Zetec) Focus RS 2003 (09/2002-)
Removal and Installation

General Equipment
6mm flat-bladed screwdriver

Removal
  1. Detach the interior lamp.

  1. Remove the interior lamp.
    1. Disconnect the interior lamp electrical connectors.
  1. Remove the A-pillar trim panels.
    For additional information, refer to A-Pillar Trim Panel in this section.
  1. Remove the B-pillar trim panels.
    For additional information, refer to B-Pillar Trim Panel in this section.
  1. Remove the C-pillar trim panels.
    For additional information, refer to C-Pillar Trim Panel in this section.

  1. Remove both sun visors.

  1. Remove the sun visor retaining clips.
    1. Lever open the screw cover.
    1. Remove the retaining screw.

  1. Lever open the covers on the four passenger assist handles.

  1. Using a suitable 6mm flat-bladed screwdriver remove the four passenger assist handles.
    • Rotate the screwdriver 90 degrees to release the retaining clips.

  1. Remove the headliner retaining clips.
  1. Remove the headliner through the liftgate opening.

Installation

  1. To install, reverse the removal procedure.

501-09 Rear View Mirrors > < Scuff Plate Trim Panel