ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Window Wiper Motor > < Windshield Wiper Blade and Pivot Arm Adjustment
Wipers and Washers - Windshield Wiper Motor Focus RS 2003 (09/2002-)
Removal and Installation

Removal

  1. NOTE:
    NOTE:Make sure that the windshield wiper motor is in the park position.
    Remove the cowl panel. For additional information, refer to Section  501-02 Front End Body Panels.

  1. Remove the cowl panel support brace.

  1. Disconnect the windshield wiper motor electrical connector.

  1. Remove the windshield wiper motor and linkage.
    • Remove the wiper motor protective cap.

  1. Mark the position of the windshield wiper crank in relation to the wiper motor bracket to aid installation.

  1. Remove the windshield wiper crank retaining nut.

  1. Remove the windshield wiper motor.

Installation

  1. To install, reverse the removal procedure.

Rear Window Wiper Motor > < Windshield Wiper Blade and Pivot Arm Adjustment