Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Fender Apron Panel Inner Reinforcement >
< Fender Apron Panel Reinforcement
Focus RS 2003 (09.2002-)
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-27 Front End Sheet Metal Repairs / Removal and Installation
Front Crossmember
Front End Sheet Metal Repairs - Front Crossmember
Focus RS 2003 (09/2002-)
Removal and Installation
Materials
Name
Specification
Crossmember
Removal
General Notes
The lock carrier/radiator grille, radiator grille, headlamps and bumper must be removed before beginning the repair.
Move all wiring away from the working area.
Crossmember
Unscrew the nuts and remove the crossmember.
Installation
Crossmember
Installation is carried out in reverse order.
NOTE:
The front crossmember must be cut off at an angle for the Focus RS (clearance to the fog lamp housing).
Use an angle grinder to cut. The high-strength low alloy steel of the crossmember cannot be cut using a body saw.
Crossmember
Cut location.
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-27 Front End Sheet Metal Repairs / Removal and Installation
Front Crossmember
Fender Apron Panel Inner Reinforcement >
< Fender Apron Panel Reinforcement