Focus ZTS L4-2.0L DOHC VIN 3 (2001)
5. Remove the steering wheel.
1
Disconnect the speed control electrical connector (if equipped).
2
Remove the steering wheel retaining bolt.
6. Remove the tolerance ring.
7. NOTE: Make sure the air bag sliding contact is not allowed to rotate. Secure in the central position with a piece of suitable tape.
Remove the air bag sliding contact.
^
Using a thin bladed screwdriver, release the two retaining clips.
8. Fully extend the steering column.
1. Release the locking lever.
2. Fully extend the steering column.
9. NOTE: The steering column two halves must be marked before separating.