Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Valve Body: Service and Repair
Main Controls
Removal
1. Remove the transaxle fluid pan.
2. Remove the Transmission Fluid Temperature (TFT) sensor.
3. Remove the fluid filter.
4. NOTE: It is necessary to note the location of the main control wire harness connectors so they can be connected in the same positions. Connector
color letters are casted into the solenoid body.
Remove the ground wire bolt. Disconnect the electrical connectors and remove the wire harness.
1. Solenoid SSC; Color N (Neutral/White)
2. Solenoid SSE; Color G (Green)
3. Solenoid SSD; Color L (Blue)
4. Solenoid EPC; Color B (Black)
5. Solenoid SSA; Color N (Neutral)
6. Solenoid SSB; Color B (Black)