ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Rotor/Disc|Front|Page 6138 > < Brake Rotor/Disc|Front|Page 6136
Page 1
background image

Brake Rotor/Disc: Service and Repair
Rear

Brake Disc

Brake Disc 

Removal 

1. Release the parking brake.
2. Remove the wheel and tire. 
3. Detach the parking brake cable from the brake caliper.

1

Pull back the parking brake lever.

2

Disconnect the cable from the parking brake lever.

3

Remove the conduit retaining clip (if equipped).

4

Disconnect the cable and conduit.

4. CAUTION:  Suspend the brake caliper and anchor plate to prevent load being placed on the brake hose.

Detach the brake caliper and anchor plate from the wheel Knuckle.

5. Remove the brake disc.

^

Remove the retaining clip (if equipped).

Installation 

1. To install, reverse the removal procedure.
2. Adjust the parking brake cable. 

Brake Disc Shield

Brake Rotor/Disc|Front|Page 6138 > < Brake Rotor/Disc|Front|Page 6136