Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Remove the instrument panel if necessary. For additional information, refer to Section 501-12.
Installation
1. WARNING: A new instrument panel must be installed following a passenger air bag deployment. Failure to follow this instruction may result in
personal injury.
NOTE: If a new passenger air bag module is being installed as a result of the existing passenger air bag module being unserviceable, do not install
a new instrument panel.
Install a new instrument panel if necessary. For additional information, refer to Section 501-12.
2. If the original passenger air bag is to be installed, loosen the passenger air bag module floating bracket retaining nuts.
3. Install the passenger air bag module.
Connect the electrical connectors.
4. Attach the passenger air bag module and reinforcement bracket to the instrument panel.
5. NOTE: Feed the trim cover brackets down through the passenger air bag module and floating bracket.
Install the passenger air bag module trim cover.