Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
1. Secure the clip.
2. Install the screws.
8. CAUTION: Do not rotate the new clockspring between breaking the red sealing key and installing the steering wheel. If the vehicle is left
unattended by the technician between breaking the red seal and installing the steering wheel, carry out the centralizing procedure.
Break the red sealing key, if necessary.
9. WARNING: INCORRECT CENTRALIZATION MAY RESULT IN PREMATURE COMPONENT FAILURE. IF IN DOUBT WHEN
CENTRALIZING THE CLOCKSPRING, REPEAT THE CENTRALIZING PROCEDURE. FAILURE TO FOLLOW THIS INSTRUCTION
MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the road wheels are in the straight ahead position.
Centralize the clockspring.
1. Turn the clockspring in a counterclockwise direction until resistance is felt.
2. Turn the clockspring in a clockwise direction, until the arrow marked on the rotor of the clockspring aligns with the raised 'V' section at the 12
o'clock position on the outer cover of the clockspring (approximately two and one half turns).
10. CAUTION: Make sure the spacing collar is correctly located when installing the steering wheel. Do not install the steering wheel if the collar is
missing.
Install the spacing collar.
11. CAUTION: If there is any break between centralizing the clockspring and installing the steering wheel, or the vehicle is left unattended by the
technician, the centralizing procedure MUST be repeated.
Install the steering wheel.
Vehicles with stability assist
WARNING: The electronic stability program must be re-configured. Failure to follow this instruction may result in personal injury.
Configure the electronic stability program using WDS.