Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Safety Belt Procedure After A Collision
Vehicles Built From: 02/2000
SEAT BELT SYSTEM
Vehicles Built From: 02/2000
WARNING: All safety belt components including retractors, buckles, front safety belt buckle support assemblies (slider bar), child safety
seat tether brackets and attaching hardware in use during a collision must be removed and new components installed. New safety belt
components should also be installed where safety belts not in use during a collision, are inspected and found to be damaged or operate
incorrectly. Failure to follow these instructions may result in personal injury.
Vehicles Built Up to: 02/2000
SEAT BELT SYSTEM
Vehicles Built Up To: 02/2000
WARNING: All safety belt assemblies including retractors, buckles, front safety belt buckle support assemblies (slider bar), if equipped,
child safety seat tether brackets and attaching hardware should be inspected after any collision. New safety belt assemblies should be fitted
unless a qualified technician finds the assemblies show no damage and operate correctly. New safety belt assemblies should also be fitted
where safety belt assemblies not in use during a collision, are inspected and damage or incorrect operation is noted. Failure to follow these
instructions may result in personal injury.
WARNING: All safety belt components including retractors, buckles, front safety belt buckle support assemblies (slider bar), child safety
seat tether brackets and attaching hardware in use during a collision must be removed and new components installed. New safety belt
components should also be installed where safety belts not in use during a collision, are inspected and found to be damaged or operate
incorrectly. Failure to follow these instructions may result in personal injury.
