Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
2. Detach the rear lower arm from the wheel knuckle.
3. Lower the suspension from the design height setting.
3-door, 4-door and 5-door
4. NOTE: Align the mark on the rear lower arm adjustment cam to the mark on the crossmember.
Install the rear lower arm.
5. Lower the suspension from the design height setting.
6. Attach the stabilizer bar to the rear lower arm.
All vehicles
7. Install the springs.
8. Check the rear wheel alignment.
Rear Upper
Upper Arm
Removal
1. Set the suspension to the design height setting.