Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Transmission Cooler: Service and Repair
Transmission Fluid Cooler Tubes
Transmission Fluid Cooler Tubes
Removal
1. WARNING: Whenever releasing the fluid cooler tubes, cover the cooler tubes with a thick cloth to prevent the possibility of scalding.
Failure to follow these instructions may result in personal injury.
CAUTION: Whenever the fluid cooler tubes are disconnected suitable blanking plugs to prevent dirt ingress.
Raise and support the vehicle.
2. NOTE: Mark the position of the feed and return fluid cooler tubes.
Disconnect the fluid cooler tubes from the transmission fluid cooler.
1. Disconnect the supply tube.
2. Disconnect the return tube.
-
Allow the fluid to drain into a suitable container.
3. CAUTION: Using an open end spanner, prevent the fluid tube adapter from turning.
NOTE: Do not remove the fluid tube adapter from the transaxle housing.
Remove the feed and return fluid cooler tubes from the automatic transaxle.
Installation
1. NOTE: Align the marks on the fluid cooler tubes.
Connect the fluid cooler tubes to the transaxle fluid cooler
