Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
11. Remove the switches from the pedal assembly.
1. Speed control deactivation switch (colored green).
2. Stop lamp switch (colored gray).
3. Clutch position switch (colored red).
4. Starter safety switch (colored black).
12. NOTE: The complete pedal assembly must be removed to gain access to the clutch master cylinder retaining bolts.
Remove the pedal assembly.
13. Remove the clutch master cylinder.
-
Mount the pedal assembly in a suitable vise.
-
Remove the retaining bolts.
-
Detach the clutch master cylinder from the pedal assembly and slide the actuating rod off the pedal arm.
Installation
1. Install the clutch master cylinder. Attach the actuating rod to the pedal arm. Attach the clutch master cylinder to the pedal assembly.
2. Position the pedal assembly in the vehicle.