Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Clutch Slave Cylinder: Service and Repair
Vehicles With IB5 Manual Transaxle
Clutch Slave Cylinder
Removal
1. Remove the transaxle.
2. CAUTION: If brake fluid is split on the paintwork, the affected area must be immediately washed down with cold water.
Remove the clutch slave cylinder.
Installation
1. CAUTION: If brake fluid is split on the paintwork, the affected area must be immediately washed down with cold water.
Coat the input shaft splines with High Temperature Grease
2. Install the clutch slave cylinder.
3. Install the transaxle.
4. Fill and bleed the clutch system.