Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
6. Disconnect the heated rear window electrical connectors.
7. Detach the high mounted stoplamp.
8. Disconnect the electrical connector and remove the high mounted stoplamp.
9. From inside the vehicle, using a suitable direct glazing cutter, cut the PU adhesive to the given maximum depths.
1. 30 mm.
2. 25 mm.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTORS. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.