Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Windshield: Service and Repair
REMOVAL
All vehicles
1. Remove the Polyurethane (PU) adhesive cap and heat the PU adhesive for a minimum of 30 minutes.
2. Raise the hood.
3. Disconnect the battery ground cable.
4. Remove the windshield wiper arms.
NOTE: Make sure that the windshield wiper motor is in the park position.
5. Remove the cowl panels.
1. Remove the screw cover.
2. Remove the screw.
3. Release the clips.
6. Lower the hood.
7. Remove the A-pillar trim panels.
Vehicles with roof opening panel
8. Remove the overhead console.
Vehicles without roof opening panel