Freestar V6-4.2L VIN 2 (2004)
Inspect the body sealant on the bulkhead to ensure it is not protruding out causing the cover not to seal properly in that area. (Figure 2) If sealant is
interferring with the PCM cover, remove excess with a sharp tool. Reinstall the PCM cover ensuring the cover seals and is flush with the bulkhead.
Remove the wiper pivot arm. (Figure 3)
Release pivot arm nut cover.
Remove the pivot arm nut.
Remove the pivot arm.
Remove the screws. (Figure 4)
Release the clips.
Remove the windshield wiper hose.