Freestar V6-4.2L VIN 2 (2004)
b.
For the one (1) center slot (upper), enlarge equally around the centerline of the existing slot (Figure 3).
3.
Apply Motorcraft Sealer PM-12-A to the enlarged sheet metal slots.
4.
Install a new rear license housing.
5.
Secure the new rear license housing studs using five (5) M4 nuts. Torque to 16 lb-in (1.8 N.m).
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
051207A
2004-2005
0.4 Hr.
Freestar/Monterey Replace
The Rear License Plate
Housing Following TSB
Service Procedure (Do Not
Use With 46404B,
46404B1, 46404B9)
051207B
2004-2005
1.3 Hrs.
Freestar/Monterey
Additional Time To Paint
Rear License Plate
Housing Includes Time For
Basic Paint Operation
P101 (Do Not Use With
P42, P42C, P42D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
17A385
12
Disclaimer