Freestar V6-42L VIN 2 (2004) Firewall: Engine & A/T Driveability Issues/DTC's
5.
Remove the upper cowl panel grille.
6.
Disconnect the electrical connector. (Figure 5)
7.
Remove the lower cowl panel assembly. (Figure 6)
a.
Remove the ten (10) bolts.
b.
Remove the lower cowl panel assembly.
8.
Obtain two (2) PVC soft foam adhesive stripes (164-R4901) from the Rotunda Squeak And Rattle Kit (164-R4900).
9.
Cut both of the PVC soft foam adhesive stripes in half, lengthwise, so you have four (4) pieces 7/8" x 6" (22 mm x 152 mm). (Figure 7)
10.
Clean the metal body surface under the lower cowl panel, in the area above the transaxle and the area above the PCM.
