Freestar V6-4.2L VIN 2 (2004)
Assemble the special tools, then place the crankshaft front seal onto the special tools.
3. Using the special tools, install the crankshaft front seal.
Item 6: Crankshaft Pulley Installation Note
1. NOTE: Apply a bead of sealant to the keyway in the crankshaft pulley.
Using the special tool, install the crankshaft pulley.
Item 3: Subframe Bolt Installation Note
1. Raise the subframe into position, then install the bolts.
2. Connect the RH front anti-lock brake wheel sensor electrical connector.