Freestar V6-4.2L VIN 2 (2004)
6. Remove the line brackets and the front auxiliary evaporator outlet and inlet lines.
7. Disconnect the fittings at the rear tube-in-tube fitting.
-
Discard the O-ring seals.
8. Remove the bolts and the line brackets.
9. Remove the auxiliary tube-in-tube assembly.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system.
