Freestar V6-4.2L VIN 2 (2004)
Item 11: Wheel Stud Installation Note
1. Using a suitable press, install a new wheel stud.
Item 10: Lower Arm (LH/RH) Installation Note
1. CAUTION: The lower control arm attachment-to-subframe bolts contain thread adhesive. Do not partially remove bolts. When removing or
installing bolts, do so with one continuous sequence to prevent the adhesive from setting.
Do not use air tools to tighten the lower arm nuts and bolts.
Item 3: Wheel Hub and Bearing Assembly Installation Note
1. Position the dust shield over the hub and bearing assembly, then fit the hub and bearing into the knuckle and seat it fully before installing the
retaining bolts.
Item 1: Axle Shaft Nut Installation Note
1. Apply a small patch of threadlock to the last five axle shaft Joint threads before installing the nut.
