ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering > < ABS - Module Replacement Service Tip|Page 6780
Page 1
background image

Tire Pressure Sensor: Testing and Inspection

Vehicles Without Message Center

To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button
for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset
procedure is complete.

Vehicles With Message Center

To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the
RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The
message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete. 

Steering > < ABS - Module Replacement Service Tip|Page 6780