Fusion L4-2.3L VIN Z (2006)
Front Door Panel: All Technical Service Bulletins
Interior - Door Panel Removal/Door Latch Inspection
TSB 06-15-6
08/07/06
UPDATED DOOR PANEL REMOVAL AND LATCH
INSPECTION SERVICE PROCEDURE
FORD:
2006 Fusion
LINCOLN:
2006 Zephyr
MERCURY:
2006 Milan
ISSUE
There is a new Service Procedure available to reset the front door latching system on 2006 Fusion, Milan, and Zephyr vehicles, when needed, to avoid
damaging the door panel when attempting to access the door latch assembly.
ACTION
Perform the following Service Procedure to gain access to all of the screws on the inside door panel.
SERVICE PROCEDURE
1.
Hold the inside lock tab down.
2.
Simultaneously press the lock and unlock buttons on the Integrated Keyhead Transmitter (IKI). This should reset the latching system and the door
should work normally.
3.
Remove the door panel following normal procedures in Workshop Manual, Section 501-05.
4.
Proceed with normal diagnosis and repair of the door latch on affected door(s) per Workshop Manual, Section 501-14.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
DEALER CODING
CONDITION
BASIC PART NO.
CODE
5422601
42
Disclaimer
