Fusion L4-2.3L VIN Z (2006)
1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
^
If excessive pitting or damage is present, install new components as necessary.
Camshaft Lobe Lift
Special Tool(s)
1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
^
If out of specification, install new components as necessary.
Camshaft Runout
Special Tool(s)
1. NOTE: Camshaft journals must be within specifications before checking runout.