Fusion L4-2.3L VIN Z (2006)
Removal and Installation
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Instrument
Panel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
2. Disconnect the LH temperature blend door actuator electrical connector.
3. Remove the 2 LH temperature blend door actuator screws.
4. Remove the LH temperature blend door actuator.
5. Disconnect the DEFROST/PANEL/FLOOR mode door actuator electrical connector.
6. Remove the 3 DEFROST/PANEL/FLOOR mode door actuator and cam assembly screws.
7. Remove the DEFROST/PANEL/FLOOR door actuator and cam assembly.
8. To install, reverse the removal procedure.