Fusion AWD L4-2.3L (2008)
8. Splice the five jumper harness wires into the following circuits:
^
Blue jumper harness wire to CBP41 (BU) and any black jumper harness wire to GD133 (BK).
^
Ensure original circuits remain connected in splice.
^
Yellow jumper harness wire to VMN02 (WH-BN) and remaining black jumper harness wires to RMN02 (VT-BN) and DMN07 (shield).
^
Only splice into the wires heading away from the connector. The wires heading into the connector (mirror) are no longer used.
^
Ensure the wiring is neatly routed from the splice locations into the headliner, following the existing wire harness routing from mirror to
headliner.
9. Attach the microphone connector to the jumper harness connector.
10. Bundle and tuck the remainder of the microphone cable above the front of the headliner.
OTHER APPLICABLE ARTICLES: 08-21-2
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
MT091305
Claim Diagnosis And Labor
Actual
Performed As Actual Time.
Time
DEALER CODING
CONDITION
BASIC PART NO.
CODE
17700
42
Disclaimer