Fusion AWD L4-2.3L (2008)
![background image](/ford/fusion_awd/l4-2.3l/Page-1193001.png)
Knock Sensor: Service and Repair
KNOCK SENSOR (KS)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the intake manifold.
3. Remove the bolt and the knock sensor (KS).
-
To install, tighten to 20 Nm (15 lb-ft).
4. NOTE: The KS must not touch the crankcase vent oil separator.
To install, reverse the removal procedure.