Fusion AWD L4-2.3L (2008)
![background image](/ford/fusion_awd/l4-2.3l/Page-1288004.png)
6. CAUTION: Use care not to over stretch or extend the hose clamps.
CAUTION: The hose clamps are held on the hose with a special epoxy. Damage may occur to the hose if the clamp is removed from the
hose. If the clamp or hose is damaged, install a new fluid cooler tube.
Disconnect the transmission fluid cooler hoses from the transmission fluid cooler tubes.
7. Remove the 2 bolts and remove the transmission fluid cooler tubes.
8. NOTE: When removing the transmission fluid cooler tubes from the retainers, do not remove the retainers from the shroud.
Remove the transmission fluid cooler tubes from the retainers.