Fusion AWD L4-2.3L (2008)
![background image](/ford/fusion_awd/l4-2.3l/Page-1378019.png)
6. Install the ground wire and the bolt.
^
Tighten to 9 Nm (80 lb-in).
7. Connect the electrical connectors.
1
Connect the electrical connector for the pressure control solenoid B.
2
Connect the electrical connector for the shift solenoid F.
8. NOTE: Do not use more than the specified amount of sealer on the side cover pan or internal transaxle damage could occur.
^
Apply a bead 1-1/2 millimeters thick of sealer to the transaxle on the side cover sealing surface.
9. Install the side cover and install the 11 bolts.
^
Tighten to 7 Nm (62 lb-in).