Fusion AWD V6-3.0L (2009)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Place a drain pan beneath the Output Shaft Speed (OSS) sensor.
3. Remove the OSS sensor.
-
Disconnect the OSS electrical connector.
-
Remove the OSS bolt.
-
Inspect the OSS bore.
4. Inspect the OSS O-ring seal for nicks or cuts, install a new OSS O-ring if necessary.
Installation