Fusion AWD V6-3.5L (2010)
48. Connect the PCV hose to the PCV valve.
49. If equipped, position the block heater wiring harness onto the engine.
-
Attach the block heater wiring harness retainer to the power steering reservoir hose and the PSP hose.
50. If equipped, connect the block heater electrical connector and install the heat shield.
51. If equipped, attach the block heater wiring harness retainer to the upper intake manifold.
52. Using the Heavy Duty Floor Crane and Spreader Bar, remove the engine from the stand.
53. Install the crankshaft sensor ring.
54. Install the flexplate and the 8 bolts.